Peaty's Holeshot Tubeless Rim Tape 50m x 27mm - Box of 6

Designed by pro riders, mechanics and scientists, Peaty's Holeshot Rim Tape has been developed from the ground up as a bicycle rim tape. Constructed from high tensile strength film & primed with a bespoke adhesive, our tape forms a strong air-tight seal with your rim and leaves no mess behind when removed! An optimum amount of stretch and large rigid recyclable core allows the tape to be pulled and applied with tension, contouring to your rim tightly for a better fit. Do you struggle to find the hole? No problem! Just hold your rim up to the light and the tape's transparent finish will illuminate the way.

KEY FEATURES

• Designed by pro riders, mechanics and scientists, Peaty's Holeshot Tubeless Rim Tape has been developed from the ground up as a bicycle rim tape
• Constructed from high tensile strength film and primed with a bespoke adhesive, our tape forms a strong air-tight seal with your rim and leaves no mess behind when removed!
• An optimum amount of stretch and a large, rigid recyclable core allows the tape to be pulled and applied with tension, contouring to your rim tightly for a better fit.
• Semi-translucent design makes finding the valve hole and serial numbers easy.
• Available in 10m and 50m rolls.

APPLICATION INSTRUCTIONS

1. Remove tyre and any old rim tape.
2. Clean and degrease rim thoroughly, ensuring rim is completely dry before application.
3. Starting two spokes behind the valve hole, press tape firmly into the centre of the rim and smooth out to the edges, removing any trapped air.
4. Run tape around the rim while keeping tape tension, finishing two spoke holes beyond the valve hole.
5. Check for any trapped air underneath the rim tape - push air bubbles out to a spoke hole to remove.
6. Use a small spike to pierce the tape in the centre of the valve hole.
7. Remove dust cap, lock ring and o-ring then push valve stem through the valve hole.
8. Re-apply the o-ring and apply lock ring tightly by hand, ensuring there are no air gaps.
9. Refit tyre, add Peaty's tubeless sealant.
10. Inflate tyre to desired pressure.
11. RIDE!